**** PLEASE NOTE: The store will be closed from 19th April until 29th April 2024 Inclusive. Any orders placed will be fulfilled after that date - subject to stock levels ****

IMPORTANT PLEASE NOTE We are not registered for VAT so the prices you see are the prices you pay!

Please note there is a 4 to 6 week waiting list from placing Tong orders until their dispatch.

Hardner Rigidiser 1 Litre has been added to your Cart
Result Pages:

This is to pack ONE box up to 25kg for export by the purchaser. We will provide the box size, weight…

Crucible Pot Stand SMALL 65mm diam 25 to 35mm tall

  Crucible Pot Stand made from 1600C Refractory. 
It is important to retain the flame vortex in the furnace to, ensure…

Crucible AP30 Salamander Super (Clay Graphite)

SALAMANDER SUPER  AP30  (Other crucible size and capacity are available by request from table below. As these are a made to…

Moulders Letters 1" Flat faced Full Alphabet-2 of each letter

Awaiting stock - These are a made to order item and are non returnable once the order is placed.  Usually a…

Crucible A30 Salamander Super (Clay Graphite)

SALAMANDER SUPER  (Choose crucible size and capacity from table below) I can supply all sizes in the table plus larger ones if required…

Hardner Rigidiser 1  Litre

DESCRIPTION Kaowool and Superwool hardeners are inorganic liquid hardening agents which, when applied to…

Sodium Silicate 500ml For making core sand)

(Sufficient to make 30 to 50 Kgs of core moulding sand dependant upon the addition rate)   Application -  Measure the amount of dry sand by pouring it into…

This is a pallet packaging and wrappining service for customer who want to organise their own carriers.…

This is a packaging service for customer who want o organise their own carriers.…

Long Reach Lift out Tongs for 60mm Crucible

**Check Pivot point for wear and security before each use and replace if worn or damaged** These are specifically made to…

6" Drossing spoon

6" Spoon 32" total length When melting metal slag/dross floats too the surface and is skimmed off with a drossing /skimming…

Moulders Letters 3/16" Sharp faced Full Alphabet-10 of each lett

Please contact us for price and availability Letters are usually manufactured to order with a 7 to 14 day lead time…

10 of each  1" Letter or Numbers (10 of each)

Please note this is a box of 10 letters or numbers all the same (They are not full number or…

10 of each  1" REVERSED numbers 0 to 9  sold in Bags of 10

Please contact us for price and availability This is a reversed set of numbers 1" -  10 of each number…

30 x Steel Ladles 10cm custom handle 100x20x6mm

30 x Heavy Duty Steel Ladle 10cm Diameter (4 inches)  100mm long custom handle cross section 20 x 6mm (NO T…

Degassing Tablet for Aluminium Nitral C19 1 x 200g tablet

Nitral C19 Degassing Tablets Box of 108 x (200gram ) Tablets Description A grey black…

Gift Vouchers (Purchase in £10.00 increments)

Gift Vouchers You can purchase Vouchers in £10 increments (eg. purchase 5 for £50.00 total) Gift cards/vouchers are valid from the moment…

Silicon Bronze Ingot 8.5kg

The temperature for pouring should be between 1150 degrees centigrade to 1180. Silicon Bronze Ingot for Bronze sculpture. (Ingot weights are…

Aluminium Drossing Flux  Coverall 7 1kg

Coverall 77  An off-white, low fluoride exothermic drossing flux for treating aluminium alloys.   Function Coverall 77…

Molochite 30/80 Mesh 5kg for Ceramic Shell Casting

Molochite (30/80 Mesh 300 to 175 micron) (Product will be shipped in a heat sealed plastic bag.)  PHOTO shows…

Result Pages: