**** PLEASE READ: ****

CHRISTMAS HOLIDAY DATES We will be closed from 20th December to 3rd January inclusive. Any orders placed will be on hold and dispatched on 6th January dependent upon stock levels.

IMPORTANT PLEASE NOTE We are not registered for VAT so the prices you see are the prices you pay!

Please note there is a 4 to 6 week waiting list from placing Tong orders until their dispatch.

Moulders Tapered Trowel with Round End

This moulders trowel is 50 to 60mmmm wide at its widest point tapering down to a rounded end approximately 25mm…

Silicon Bronze Ingot 1kg

The temperature for pouring should be between 1150 degrees centigrade to 1180. Silicon Bronze Ingot for Bronze sculpture. (Ingot weights are…

Aluminium Sand Scoop

Sand Scoop When filling the flask (drag and cope) this is a useful aid when completing work on the bench rather…

Galvanised Steel Bucket

Galvanised Steel Bucket
Suitable for hot Ash Slag and Dross
Excellent quenching bucket
Horizontal Body Swedges For Extra Strength
For…

Bromsgrove Greensand 20kg

20Kg gross weight inclusive of packaging
(This sand is an unsieved natural quarried sand and may contain stone inclusions. Prior to…

Green Sand Foundry Casting Bromsgrove

20Kg gross weight inclusive of packaging
(This sand is an unsieved natural quarried sand and may contain stone inclusions. Prior to use…

Molochite16/30 Mesh 5kg for Ceramic Shell Casting

  Molochite (16/30 Mesh 1200 to 600 micron) (Product will be shipped in a heat sealed plastic bag.) Molochite -16/30 is calcined…

Molochite50/80 Mesh 5kg for Ceramic Shell Casting

  Molochite (50/80 Mesh 300 to 175 micron) (Product will be shipped in a heat sealed plastic bag.) Molochite -50/80 is calcined…

Ramming Dolly Moulders Hardwood Rammer

Hardwood Rammer  (Ramming Dolly Used by Foundry Moulders) The ramming dolly is an essential tool for ramming sand into the moulding…

Silica Sand 25kg 60 Grit/ Mesh for Core Making

25Kg gross weight inclusive of packaging (This sand needs to be mixed with Sodium Silicate to be ready to use) Using Kiln…

Leather Mitts

Leather Mitts Foundry mitts which are heat resistant.
The Mitt and digit are fully lined.
The cuff is150mm long. Total mitt length…

Chrome Leather Apron (Small)

Small chrome Leather Apron 36" x 24" wide. (Colour may vary) It has a neck strap and rear ties. This Apron gives good…

Modelling Investment Wax (1kg) Suitable for Sculpting

Modelling / Investment Wax 
An easy to model wax which softens with hand heat. It sticks easily to itself for…

Bentomix Oil Sand 5Kg (Trial Pack)

The manufacturer has had a fire and currently can't manufacture this product. We are therefore shipping another product called…

Bullfinch Burner 1220

Medium flame - for soldering and silver soldering. Power - 2.5kW Diameter - 21mm Fits all standard Bullfinch torches.…

Fire Cement 2Kg

FIRE CEMENT is a ready mixed blend of thermo setting resins and inorganic fillers that cures when exposed to heat, resulting…

Furnace Charging Tongs

Furnace Charging Tongs These are cast iron charging tongs essential for safely lowering ingots into the crucible. They can open and…

Molochite 30/80 Mesh 5kg for Ceramic Shell Casting

Molochite (30/80 Mesh 300 to 175 micron) (Product will be shipped in a heat sealed plastic bag.)  PHOTO shows…

Mould Blacking Refractory Mould Coat 1Kg

Mould Blacking Refractory Coat
GZA4 PASTE (Please note we can't get hold of this product and are sening mould whiting as…

Mouldable Clay Refractory 5kg

5KG BAG Mouldable 1600C clay refraactory Used for furnace, crucible and lid manufacture. Needs to be dried slowly then fired to become…