IMPORTANT PLEASE NOTE
Because of stock shortages due to the Coronavirus we are temporarily closing for a week in the first instance from 4th April, until we secure new stock. No new orders will be accepted until we resume trading. Please check back for further updates.
This castable refractory can be used to line furnaces, forges and kilns with a maximum temperature range of 1700C.
It is an easy to product to use.
Mixing instructions - Mix using a minimum amount of water then pour into the mould slowly packing it down every 5 to 10cm to ensure there are no air pockets. It will set in 24hrs but should be left to cure and dry out for 1 week. Heat can then be gradually applied (300 to 400C) to finally drive off remaining moisture prior to bringing it to operating temperature.
Do not rush the process as drying to quickly will result in shrinkage cracks that will lead to a much shorter working life.