**** Open As Usual! ****
We still have a 6 to eight week lead time for tongs and furnaces as they are made to order.

Our suppliers are struggling to get some items due to transport issues.

Roll Pin 120 pcs set has been added to your Cart
Result Pages:
Parting Powder 10kg (Calcium Carbonate)

Parting Powder (Ground Natural Calcium Carbonate) 10 Kilogram Description The product contains no substance classified as hazardous to health according…

Parting Powder 5kg (Calcium Carbonate)

Parting Powder (Ground Natural Calcium Carbonate) 5Kilogram Description The product contains no substance classified as hazardous to health according to…

Pouring Hoop Dual Handle / Cradle for A12 Crucible (Other sizes

THIS IS A DUAL HANDLE POURER FOR TWO PEOPLE 
These are specifically made to order to suit the crucible…

Pouring Hoop / Cradle for A12 Crucible (Other sizes available)

These are specifically made to order to suit the crucible size There can be a 2 to 4 week wait…

Lift out Tongs for A16 Crucible (Other sizes available)

**Check Pivot point for wear and security before each use and replace if worn or damaged** These are specifically made to…

Cranked Lift out and Pouring Tongs for A1 Crucible (Other sizes

**Check Pivot point for wear and security before each use and replace if worn or damaged** As these are cranked the…

Silicon Bronze Ingot 8kg

Silicon Bronze Ingot for Bronze sculpture.(Ingot weights are plus or minus 2.5% as all ingots are different sizes)  This is…

Lift out Tongs for A0.5 Crucible (Other sizes available)

**Check Pivot point for wear and security before each use and replace if worn or damaged** These are specifically made to…

Silicon Bronze Ingot 1kg

The temperature for pouring should be between 1150 degrees centigrade to 1180. Silicon Bronze Ingot for Bronze sculpture. (Ingot weights are…

Zircon Flour 200 Mesh 800grams for Ceramic Shell Casting

  Zircon Flour (200Mesh 75micron) (Product will be shipped in a heat sealed plastic bag.) Zircon flour -200…

Modelling Investment Wax (250 grams) Suitable for Sculpting

Modelling / Investment Wax 
An easy to model wax which softens with hand heat. It sticks easily to itself for…

Modelling Investment Wax (500 grams) Suitable for Sculpting

Modelling / Investment Wax 
An easy to model wax which softens with hand heat. It sticks easily to itself for…

Modelling Investment Wax (1kg) Suitable for Sculpting

Modelling / Investment Wax 
An easy to model wax which softens with hand heat. It sticks easily to itself for…

Mould Casting Wax 2Kg for Lost Wax Investment Casting

Lost Wax Billet 2Kg (Broken from billet in Photograph- Now comes as beads ) This product is a hard stable wax intended for…

Sodium Silicate 5 Litres For making core sand)

(Sufficient to make 150 to 250 Kgs of core moulding sand dependant upon the addition rate)   Application -  Measure the amount of dry sand by pouring it…

Lift out Tongs for A1 Crucible (Other sizes available)

These are specifically made to order to suit the crucible size There can be a 2 to 4 week wait…

Core Box Clamps (Pair 90mm)

These are traditional pattern makers core box clamps. They are sold in pairs and consist of six pieces of steel. The…

Core Box Clamps (Pair 40mm)

These are traditional pattern makers core box clamps. They are sold in pairs and consist of six pieces of steel. The…

Refractory Paint Microcollid 400 for ladles, skimmers 14Kg Pale

Mikrocollid 400 (1 x 14kg Pale)
This is a special coating for casting tools with good mechanical properties, i. e. it…

Refractory Paint Microcollid 400 - ladles, skimmers 1Kg Tin

Mikrocollid 400 (1kg Tin)
This is a special coating for casting tools with good mechanical properties, i. e. it protects the…

Result Pages: