**** European Shipping ****
All orders are shipped (DDU) Delivered Duty Unpaid and means the receiver/customer will get contacted by customs once their shipment arrives, and will have to settle any charges in order for customs to release the shipment and have it delivered.

Please note there is a 5 to 6 week waiting list from placing Furnace and Tong orders until their dispatch due to demand. Store closures periods do not count as part of this wait time.

Result Pages:
Aluminium Drossing Flux  Eco 146 25 Kg Sack

Description  Ecoflux 146  25Kg Sack An off-white, low fluoride exothermic drossing flux for treating…

Hot Topping flux LF460 1kg

LINOFEED 460 1kg  (keeps risers hot allowing molten metal to pipe/draw into the casting and prevents  shrinkage faults) Description
Linofeed 460 is a granular brown coloured…

Molochite Suspension Flour 200 Mesh 20kg for Ceramic Shell Casti

Molochite Suspension Blend (200Mesh 75micron)  (Packaged in plastic bag and outer white hessian sack) New Suspencion blend Flour for colloidal silica with…

Crucible A40 Salamander Super (Clay Graphite)

A40 SALAMANDER SUPER  ***** This is a non stock item that we order in, please contact us for availability ***** (Choose crucible size…

20 Bags of Mansbond Oil Sand 500Kg for metal casting

This is for 500kg delivered by pallet to a mainland UK postcode Mansbond Oil Sand 25Kg (This moulding sand is ready…

Core Glue 1 Litre

Recommended Use Especially suited to the jointing of cores and moulds produced by the Carbon Dioxide and self-setting silicate processes.…

Investment Powder Gold-Star XL 2.5Kg

Gold-Star XL Investment Powder 2.5Kg  Gold Star XL benefits from the high quality cristobalite that is tailored to our exact specification…

Cone Ingot Mould Cast Bronze

The advantage of bronze is they don't rust and you can pour cast iron into them so long as you…

Primecoat Binder for Investment Casting 1 Litres

Primecote Binder (Product will be shipped in a plastic bottle.) Primcote binder was formulated to eliminate buckling,…

Moulders Letters Plastic 26mm Flat faced Full Alphabet-2 of each

Plastic moulders letters 2 of each. Flat faced 26mm face height 31mm total height Before use carefully remove plastic sprues from…

Molochite Suspension Flour 200 Mesh 5kg for Ceramic Shell Castin

  Molochite -Suspension Blend - (200Mesh 75micron) (Product will be shipped in a heat sealed plastic bag.) Molochite -200 is a suspension…

Primecoat Binder 1 Litre for Investment Casting

Primecote Binder (Product will be shipped in a plastic bottle.) Primcote binder was formulated to eliminate buckling,…

Cranked Lift out and Pouring Tongs for A2 Crucible (Other sizes

**Check Pivot point for wear and security before each use and replace if worn or damaged** As these are crankedthe crucible…

Paper Sacks 1000 (3 Ply Kraft Brown)

1000 Sacks Multi- Use (Pallet delivery included - UK Mainland Only) phone for price for other locations) Colour - Plain Brown…

Block Investment Lost Wax Casting (Course 3)

This course stands independently as an introduction to the craft of Lost wax casting using the Block investment technique. Previous knowledge and…

Superwool 607 HT 128Kg 13mm Body Soluble Fibre Blanket Per metre

Superwool  607 HT 128kg 13mm Blanket  Product Information 13mm thick x 610mm wide x 1 metres long (This is a cut to lengh…

Zinc Aluminium Alloy ZL12 (Small Ingots 1KG)

Small ingots 1kg or less for the smaller crucibles

ZL12 is a 12% Aluminium – Zinc alloy which conforms…

Calcium Carbonate / Parting Powder 1kg

(Ground Natural Calcium Carbonate) also known as Parting Powder   Not to be confused with whiting which is not as fine…

Cranked Lift out and Pouring Tongs for A6 Crucible (Other sizes

Safety - Pivot points should be checked regularly and replaced as necessary.
              Do not…

Steel Ladle 75mm (3") Diameter with a 40cm handle

  This is a stamped and forged ladle out of one piece hence the price differential. They are a non stock item…

Result Pages: