New Products
Silicon Bronze Ingot 8.5kg
The temperature for pouring should be between 1150 degrees centigrade to 1180. Silicon Bronze Ingot for Bronze sculpture. (Ingot weights are…
Mouldable Clay Refractory 5kg
5KG BAG Mouldable 1600C clay refraactory Used for furnace, crucible and lid manufacture. Needs to be dried slowly then fired to become…
Aluminium Drossing Flux Coverall 77 1kg
Coverall 77 An off-white, low fluoride exothermic drossing flux for treating aluminium alloys. Function Coverall 77…
Molochite 30/80 Mesh 5kg for Ceramic Shell Casting
Molochite (30/80 Mesh 300 to 175 micron) (Product will be shipped in a heat sealed plastic bag.) PHOTO shows…
Fitting Bullfinch Burner 1260
This burner price option includes fitting and testing to furnace Large flame - Metal Melting up to A4 size crucible Flame size…
Mould Blacking Refractory Mould Coat 5Kg
5kg Mould Blacking Refractory Coat (1kg tub shown in Photo)
GZA4 PASTE (Please note we can't get hold of this product…
Fire Clay 25kg
25KG BAG OF GRANULAR FIRE CLAY DRY Granular clay - No dust when mixing EXCELLENT GAP FILLER OR LEVELLER BEFORE BRICKS ARE LAID IN…
Sprue Cutter 25mm diameter 300mm long
We have had these 25mm by 300mm long sprue cutter specially made from thin wall seamless polished stainless steel. Being…
Sprue Cutter 25mm diameter 300mm long
We have had these 25mm by 300mm long sprue cutter specially made from thin wall polished stainless steel. Being so…
Coveral 77 Aluminium Drossing Flux 1Kg
Coveral 77 Aluminium Drossing flux 1Kg (Image shows 25kg Sack) Product Description - COVERAL 77…
Coveral 77 Aluminium Drossing Flux 25Kg
Coveral 77 Aluminium Drossing flux 25Kg (These are an ordered in item) Product…
Ingot Mould Small(2 bay)
Unlike some ingot moulds these have been designed with a good taper and smooth inside walls to allow easy release…
1kg Grade KA low melt ingot casting Alloy
1Kg (Ingots are approx 1kg each plus or minus 2%)
Melting point of 185ºC
Recomended pouring temperature of 245ºC
Porosity problems could indicate…
Fire Cement 1Kg
FIRE CEMENT 1kg is a ready mixed blend of thermo setting resins and inorganic fillers that cures when exposed to…
5kg Grade KA low melt ingot casting Alloy
5Kg (Ingots are approx 1kg each plus or minus 2%)
Melting point of 185ºC
Recomended pouring temperature of 245ºC
Porosity problems could indicate…
Pouring Hoop / Cradle for A16 Crucible (Other sizes available)
These are specifically made to order to suit the crucible size There can be a 2 to 4 week wait…
Cranked Lift out and Pouring Tongs for A5 Crucible (Other sizes
Safety - Pivot points should be checked regularly and replaced as necessary.
Do not…
Ingot Mould Large Flat
Unlike some ingot moulds these have been designed with a good taper and smooth inside walls to allow easy release…
Moulders Numbers 1" Sharp faced - 2 of each number)
Please contact us for price and availability Letters are usually manufactured to order with a 7 to 14 day lead time…
Moulders Letters 1" Sharp faced Full Alphabet-2 of each letter
Please contact us for price and availability Letters are usually manufactured to order with a 7 to 14 day lead time…