New Products
Molochite16/30 Mesh 5kg for Ceramic Shell Casting
Molochite (16/30 Mesh 1200 to 600 micron) (Product will be shipped in a heat sealed plastic bag.) Molochite -16/30 is calcined…
Molochite16/30 Mesh 25kg for Ceramic Shell Casting
Molochite (16/30 Mesh 1200 to 600 micron) (Product will be shipped in a heat sealed plastic bag.) Molochite -16/30 is calcined…
Molochite50/80 Mesh 5kg for Ceramic Shell Casting
Molochite (50/80 Mesh 300 to 175 micron) (Product will be shipped in a heat sealed plastic bag.) Molochite -50/80 is calcined…
Molochite50/80 Mesh 25kg for Ceramic Shell Casting
Molochite (50/80 Mesh 300 to 175 micron) (Product will be shipped in a heat sealed plastic bag.) Molochite -50/80 is calcined…
Lift out Tongs for A7 Crucible (Other sizes available)
**Check Pivot point for wear and security before each use and replace if worn or damaged** These are specifically made to…
Lift out Tongs for A8 Crucible (Other sizes available)
**Check Pivot point for wear and security before each use and replace if worn or damaged** These are specifically made to…
Lift out Tongs for A10 Crucible (Other sizes available)
**Check Pivot point for wear and security before each use and replace if worn or damaged** These are specifically made to…
Pouring Hoop / Cradle for A7 Crucible (Other sizes availabel)
These are specifically made to order to suit the crucible size There can be a 2 to 4 week wait…
Pouring Hoop / Cradle for A8 Crucible (Other sizes availabel)
These are specifically made to order to suit the crucible size There can be a 2 to 4 week wait…
Sand Delft Clay Moulding Box Casting Flask
Traditional Jewellers metal casting flask/moulding box robustly made from cast iron Traditional sand casting flask Vertical & horizontal filling Held securely by two…
Core Box Clamps (Pair 40mm)
These are traditional pattern makers core box clamps. They are sold in pairs and consist of six pieces of steel. The…
Core Box Clamps (Pair 90mm)
These are traditional pattern makers core box clamps. They are sold in pairs and consist of six pieces of steel. The…
Sodium Silicate 5 Litres For making core sand)
(Sufficient to make 150 to 250 Kgs of core moulding sand dependant upon the addition rate) Application - Measure the amount of dry sand by pouring it…
Mould Casting Wax 2Kg for Lost Wax Investment Casting
Lost Wax Billet 2Kg (Broken from billet in Photograph- Now comes as beads ) This product is a hard stable wax intended for…
Modelling Investment Wax (1kg) Suitable for Sculpting
Modelling / Investment Wax
An easy to model wax which softens with hand heat. It sticks easily to itself for…
Modelling Investment Wax (500 grams) Suitable for Sculpting
Modelling / Investment Wax
An easy to model wax which softens with hand heat. It sticks easily to itself for…
Silicon Bronze Ingot 1kg
The temperature for pouring should be between 1150 degrees centigrade to 1180. Silicon Bronze Ingot for Bronze sculpture. (Ingot weights are…
Pouring Hoop / Cradle for A10 Crucible (Other sizes availabe)
These are specifically made to order to suit the crucible size There can be a 2 to 4 week wait…
Silicon Bronze Ingot 8.5kg
Silicon Bronze Ingot for Bronze sculpture.(Ingot weights are plus or minus 2.5% as all ingots are different sizes) This is…
Cranked Lift out and Pouring Tongs for A1 Crucible (Other sizes
**Check Pivot point for wear and security before each use and replace if worn or damaged** As these are cranked the…