New Products
Molochite Suspension Flour 200 Mesh 1.5kg for Ceramic Shell Cast
Molochite -Suspension Blend - (200Mesh 75micron) (Product will be shipped in a heat sealed plastic bag.) Molochite -200 is a suspension…
Plumbago Powdered Graphite 1Kg
Graphite Plumbago (Used as a parting agent with iron gives smoother finish to castings can also be used as a…
Sodium Silicate 1 Litre For making core sand)
(Sufficient to make 30 to 50 Kgs of core moulding sand dependant upon the addition rate) Application - Measure the amount of dry sand by pouring it into…
.gif "Wax Carving Modelling Kit 12 piece doubled ended stainless steel")
Wax Carving Modelling Kit 12 piece doubled ended stainless steel
Stainless steel modeling tools come in an astounding variety of shapes, useful in all sorts of hand building situations. They…
10 of each 1" Letter or Numbers (10 of each)
Please note this is a box of 10 letters or numbers all the same (They are not full number or…
Wax Fillet Rubber Tool 1/4" & 5/16" Radius
These are double ended tools suitable for two sizes of wax. Chrome plated for longevity and ease of cleaning. They are long…
Wax Fillet Rubbing Tool 1/8" & 3/16" Radius
These are double ended tools suitable for two sizes of wax. Chrome plated for longevity and ease of cleaning. They are long…
Moulders Numbers 3/4" Sharp faced (0 to 9 - 2 of each number)
Please contact us for price and availability Letters are usually manufactured to order with a 7 to 14 day lead time…
Mould Casting Wax 2Kg for Lost Wax Investment Casting
Lost Wax Billet 2Kg (Broken from billet in Photograph- Now comes as beads ) This product is a hard stable wax intended for…
Moulders Tapered Trowel with Round End
This moulders trowel is 50 to 60mmmm wide at its widest point tapering down to a rounded end approximately 25mm…
Silicon Bronze Ingot 1kg
The temperature for pouring should be between 1150 degrees centigrade to 1180. Silicon Bronze Ingot for Bronze sculpture. (Ingot weights are…
Dense Castable Refractory 1600C Furnace, forge Lining 5Kg
Photo shows a 25kg sack not the 5kg bag This 5kg bag of castable refractory can be used to line furnaces,…
Galvanised Steel Bucket
Galvanised Steel Bucket
Suitable for hot Ash Slag and Dross
Excellent quenching bucket
Horizontal Body Swedges For Extra Strength
For…
Bromsgrove Greensand 20kg
20Kg gross weight inclusive of packaging
(This sand is an unsieved natural quarried sand and may contain stone inclusions. Prior to…
Green Sand Foundry Casting Bromsgrove
20Kg gross weight inclusive of packaging
(This sand is an unsieved natural quarried sand and may contain stone inclusions. Prior to use…
Molochite16/30 Mesh 5kg for Ceramic Shell Casting
Molochite (16/30 Mesh 1200 to 600 micron) (Product will be shipped in a heat sealed plastic bag.) Molochite -16/30 is calcined…
Molochite50/80 Mesh 5kg for Ceramic Shell Casting
Molochite (50/80 Mesh 300 to 175 micron) (Product will be shipped in a heat sealed plastic bag.) Molochite -50/80 is calcined…
Ramming Dolly Moulders Hardwood Rammer
Hardwood Rammer (Ramming Dolly Used by Foundry Moulders) The ramming dolly is an essential tool for ramming sand into the moulding…
Silica Sand 25kg 60 Grit/ Mesh for Core Making
25Kg gross weight inclusive of packaging (This sand needs to be mixed with Sodium Silicate to be ready to use) Using Kiln…
Leather Mitts
Leather Mitts
Foundry mitts which are heat resistant.
The Mitt and digit are fully lined.
The cuff is150mm long. Total mitt length…