**** PLEASE READ: ****

SUMMER closure DATES We will be closed from 2nd July to 16th July inclusive. (Last Shipments leave us on 1st July 12.30pm) Any orders placed during the closure will be on placed on hold and dispatched on 17th July dependent upon stock levels.

BROMSGROVE SAND Now back in stock!

IMPORTANT PLEASE NOTE We are not registered for VAT so the prices you see are the prices you pay!

Please note there is a 4 to 6 week waiting list for manufacture from placing Tong and ingot mould orders.

Molochite16/30 Mesh 5kg for Ceramic Shell Casting

  Molochite (16/30 Mesh 1200 to 600 micron) (Product will be shipped in a heat sealed plastic bag.) Molochite -16/30 is calcined…

Molochite50/80 Mesh 5kg for Ceramic Shell Casting

  Molochite (50/80 Mesh 300 to 175 micron) (Product will be shipped in a heat sealed plastic bag.) Molochite -50/80 is calcined…

Ramming Dolly Moulders Hardwood Rammer

Hardwood Rammer  (Ramming Dolly Used by Foundry Moulders) The ramming dolly is an essential tool for ramming sand into the moulding…

Silica Sand 25kg 60 Grit/ Mesh for Core Making

25Kg gross weight inclusive of packaging (This sand needs to be mixed with Sodium Silicate to be ready to use) Using Kiln…

Leather Mitts

Leather Mitts Foundry mitts which are heat resistant.
The Mitt and digit are fully lined.
The cuff is150mm long. Total mitt length…

Chrome Leather Apron (Small)

Small chrome Leather Apron 36" x 24" wide. (Colour may vary) It has a neck strap and rear ties. This Apron gives good…

Modelling Investment Wax (1kg) Suitable for Sculpting

Modelling / Investment Wax 
An easy to model wax which softens with hand heat. It sticks easily to itself for…

Bentomix Oil Sand 5Kg (Trial Pack)

The manufacturer has had a fire and currently can't manufacture this product. We are therefore shipping another product called…

Bullfinch Burner 1220

Medium flame - for soldering and silver soldering. Power - 2.5kW Diameter - 21mm Fits all standard Bullfinch torches.…

Fire Cement 2Kg

FIRE CEMENT is a ready mixed blend of thermo setting resins and inorganic fillers that cures when exposed to heat, resulting…

Furnace Charging Tongs

Furnace Charging Tongs These are cast iron charging tongs essential for safely lowering ingots into the crucible. They can open and…

Molochite 30/80 Mesh 5kg for Ceramic Shell Casting

Molochite (30/80 Mesh 300 to 175 micron) (Product will be shipped in a heat sealed plastic bag.)  PHOTO shows…

Mould Blacking Refractory Mould Coat 1Kg

Mould Blacking Refractory Coat
GZA4 PASTE (Please note we can't get hold of this product and are sening mould whiting as…

Mouldable Clay Refractory 5kg

5KG BAG Mouldable 1600C clay refraactory Used for furnace, crucible and lid manufacture. Needs to be dried slowly then fired to become…

Primecoat Binder for Investment Casting 1 Litres

Primecote Binder (Product will be shipped in a plastic bottle.)
Due to Problems getting hold of this productwe are currently…

Wexcoat Binder 1 Litre for Investment Casting

Wexcoat Binder (Product will be shipped in a plastic bottle.)
Wexcoat binder was formulated to eliminate buckling, lifting, cracking, casting…

Moulders Heart & Square Trowel

Moulders Heart & Square Trowel Sorry this is discontinued This is the ideal …

Ingot Mould Small(2 bay)

Unlike some ingot moulds these have been designed with a good taper and smooth inside walls to allow easy release…

Moulders Letters Condensed 3/4" 20mm Full Alphabet (2 of each)

Limited stocks available A well defined condensed width letter, clean & sharp which removes from sand mould easily due to 5 degree…

Sieve or Riddle (mesh  6mm)

Features 6mm mesh sizes Perfect for removing debris and preparing greensand/ oilsand An essential foundry tool. Information This Metal Frame Riddle is ideal for any…