**** We are back open again! ****
Some of our suppliers are having problems with stock so you may be asked to phone up before checkout to check stock levels
We still have a 6 to eight week lead time for tongs and furnaces as they are made to order.

Please accept our apologies for any inconvenience caused. We are not Registered for VAT

Sprue Pins  are used to create the runner and riser in the sand mould

Sprue pins are set a distance from the pattern to allow sufficient space to cut gates into the mould. The pattern and sprue pins are coated with parting powder prior to covering with sand and ramming firm. The pattern and sprues are rapped prior to removal.

It is important that the sand is not layered by compacting into separate stratas with the butt of the rammer. If so these sand layers can seperate causing the mould to fall out.

Good quality wooden sprue pins are always made from hardwood with a coating of linseed oil to prevent water absorption. They come  in various length and diameters to suit the size of the casting, feeding requirements and moulding box size. They have a draught/taper which allows easy removal from the mould. 

Some founders prefer  to use a sprue cutter and cut the runner and riser after the mould is rammed up