IMPORTANT PLEASE NOTE We are not registered for VAT so the prices you see are the prices you pay!

STORE CLOSURE DATES Due to store refurbishment any orders placed during 14th June to 24th June inclusive will be on hold and dispatched on 25th June dependant upon stock levels.

This castable refractory can be used to line furnaces, forges and kilns with a maximum temperature range of 1700C.

It is an easy to product to use.

Mixing instructions - Mix using a minimum amount of water then pour into the mould slowly packing it down every 5 to 10cm to ensure there are no air pockets. It will set in 24hrs but should be left to cure and dry out for 1 week. Heat can then be gradually applied (300 to 400C) to finally drive off remaining moisture prior to bringing it to operating temperature.

Do not rush the process as drying to quickly will result in shrinkage cracks that will lead to a much shorter working life.