**** European Shipping ****
We are closed from 29th June until 4th July. Goods ordered will ship on Monday 5th dependent upon stock levels.
All orders are shipped (DDU) Delivered Duty Unpaid and means the receiver/customer will get contacted by customs once their shipment arrives, and will have to settle any charges in order for customs to release the shipment and have it delivered.

Please note there is a 5 to 6 week waiting list from placing Furnace and Tong orders until their dispatch due to demand. Store closures periods do not count as part of this wait time.

Refractory Paint for ladles, skimmers and steel crucibles 100gm has been added to your Cart

Currently unavailable we are looking for new supplier!
These are a made to order item and are non returnable

Sizes overall external without handles 295 x 80 x 55mm
Handles / turning flaps 20mm long
Maximum Capacity 800cc equivalent to 7kg in Bronze

Unlike some ingot moulds these have been designed with a good taper and smooth inside walls to allow easy release of ingots.

The small lug is for tipping out using tongs. Prior to use the ingot mould should be coated with delta cast mould release or mould blacking to aid ingot release. Re-coat as necessary following manufacturers instructions.

For making ingots after melting down scrap or when too much metal has been smelted.

Ingot moulds should be pre-heated to 50 to 100C to drive off moisture and prevent thermal shock cracking prior to pouring molten metal into them. Use of release coating is advisable which also gives added protection from thermal shock stresses.