Currently unavailable we are looking for new supplier!
These are a made to order item and are non returnable
Sizes overall external without handles 295 x 80 x 55mm
Handles / turning flaps 20mm long
Maximum Capacity 800cc equivalent to 7kg in Bronze
Unlike some ingot moulds these have been designed with a good taper and smooth inside walls to allow easy release of ingots.
The small lug is for tipping out using tongs. Prior to use the ingot mould should be coated with delta cast mould release or mould blacking to aid ingot release. Re-coat as necessary following manufacturers instructions.
For making ingots after melting down scrap or when too much metal has been smelted.
Ingot moulds should be pre-heated to 50 to 100C to drive off moisture and prevent thermal shock cracking prior to pouring molten metal into them. Use of release coating is advisable which also gives added protection from thermal shock stresses.