Displaying 61 to 80 (of 156 products)
SALAMANDER SUPER
(Choose crucible size and capacity from table below)
I can supply all sizes in the table plus larger ones if required…
SALAMANDER SUPER
(Choose crucible size and capacity from table below)
I can supply all sizes in the table plus larger ones if required…
Unlike some ingot moulds these have been designed with a good taper and smooth inside walls to allow easy release…
Limited stocks available
A well defined condensed width letter, clean & sharp which removes from sand mould easily due to 5 degree…
Moulders Heart & Square Trowel
This is the ideal moulders trowel for use in…
SALAMANDER SUPER
(Choose crucible size and capacity from table below)
I can supply all sizes in the table plus larger ones if required…
Medium flame - for soldering and silver soldering.
Power - 2.5kW
Diameter - 21mm
Fits all standard Bullfinch needle valve torches.…
FIRE CEMENT is a ready mixed blend of thermo setting resins and inorganic fillers that cures when exposed to heat, resulting…
Mould Blacking Refractory Coat
GZA4 PASTE (Please note we can't get hold of this product and are sening mould whiting as…
Primecote Binder (Product will be shipped in a plastic bottle.)
Due to Problems getting hold of this productwe are…
5kg Repair Pack Volume as below but divided by 5.
Supplied in sealed plastic bag not a box as per photo…
Modelling / Investment Wax
An easy to model wax which softens with hand heat. It sticks easily to itself for…
Small chrome Leather Apron 36" x 24" wide. (Colour may vary)
It has a neck strap and rear ties.
This Apron gives good…
Leather Mitts
Foundry mitts which are heat resistant.
The Mitt and digit are fully lined.
The cuff is150mm long. Total mitt length…
20Kg gross weight inclusive of packaging
(This sand is an unsieved natural quarried sand and may contain stone inclusions. Prior to…
20Kg gross weight inclusive of packaging
(This sand is an unsieved natural quarried sand and may contain stone inclusions. Prior to use…
Hardwood Rammer (Ramming Dolly Used by Foundry Moulders)
The ramming dolly is an essential tool for ramming sand into the moulding…
25Kg gross weight inclusive of packaging (This sand needs to be mixed with Sodium Silicate to be ready to use)
Using Kiln…
Sand Scoop
When filling the flask (drag and cope) this is a useful aid when completing work on the bench rather…
Galvanised Steel Bucket
Suitable for hot Ash Slag and Dross
Excellent quenching bucket
Horizontal Body Swedges For Extra Strength
For…
Displaying 61 to 80 (of 156 products)