Displaying 61 to 80 (of 156 products)
Foundrywork for the Amateur (Workshop Practice Series 4)
By Terry Aspin
This is an excellent text for those wishing to start metal…
The Backyard Foundry (Workshop Practice Series 25)
By Terry Aspin
This is an excellent text for those wishing to start metal casting.…
Limited stocks available
A well defined condensed width Number, clean & sharp which removes from sand mould easily due to 5 degree…
SALAMANDER SUPER
(Choose crucible size and capacity from table below)
I can supply all sizes in the table plus larger ones if required…
5Kg of Bentonite Clay is sufficient to make 50Kg of new greensand
(Used to make Green sand for moulding and to…
Recommended Use Especially suited to the jointing of cores and moulds produced by the Carbon Dioxide and self-setting silicate processes.…
Furnace Charging Tongs
These are cast iron charging tongs essential for safely lowering ingots into the crucible. They can open and…
Graphite Plumbago (Used as a parting agent with iron gives smoother finish to castings can also be used as a…
(Sufficient to make 30 to 50 Kgs of core moulding sand dependant upon the addition rate)
Application -
Measure the amount of dry sand by pouring it into…
Stainless steel modeling tools come in an astounding variety of shapes, useful in all sorts of hand building situations. They…
These are double ended tools suitable for two sizes of wax.
Chrome plated for longevity and ease of cleaning.
They are long…
These are double ended tools suitable for two sizes of wax.
Chrome plated for longevity and ease of cleaning.
They are long…
Sand Scoop
When filling the flask (drag and cope) this is a useful aid when completing work on the bench rather…
Galvanised Steel Bucket
Suitable for hot Ash Slag and Dross
Excellent quenching bucket
Horizontal Body Swedges For Extra Strength
For…
20Kg gross weight inclusive of packaging
(This sand is an unsieved natural quarried sand and may contain stone inclusions. Prior to…
20Kg gross weight inclusive of packaging
(This sand is an unsieved natural quarried sand and may contain stone inclusions. Prior to use…
Hardwood Rammer (Ramming Dolly Used by Foundry Moulders)
The ramming dolly is an essential tool for ramming sand into the moulding…
25Kg gross weight inclusive of packaging (This sand needs to be mixed with Sodium Silicate to be ready to use)
Using Kiln…
Leather Mitts
Foundry mitts which are heat resistant.
The Mitt and digit are fully lined.
The cuff is150mm long. Total mitt length…
Small chrome Leather Apron 36" x 24" wide. (Colour may vary)
It has a neck strap and rear ties.
This Apron gives good…
Displaying 61 to 80 (of 156 products)