**** We are back open again! ****
Some of our suppliers are having problems with stock so you may be asked to phone up before checkout to check stock levels
We still have a 6 to eight week lead time for tongs and furnaces as they are made to order.

Please accept our apologies for any inconvenience caused. We are not Registered for VAT

Result Pages:
Aluminium Sand Scoop

Sand Scoop When filling the flask (drag and cope) this is a useful aid when completing work on the bench rather…

Cranked Lift out and Pouring Tongs for A0.5 Crucible (Other size

**Check Pivot point for wear and security before each use and replace if worn or damaged** As these are crankedthe crucible…

Cranked Lift out and Pouring Tongs for A1 Crucible (Other sizes

**Check Pivot point for wear and security before each use and replace if worn or damaged** As these are crankedthe crucible…

Cranked Lift out and Pouring Tongs for A2 Crucible (Other sizes

**Check Pivot point for wear and security before each use and replace if worn or damaged** As these are crankedthe crucible…

Cranked Lift out and Pouring Tongs for A3 Crucible (Other sizes

**Check Pivot point for wear and security before each use and replace if worn or damaged** Photo Shows A1 as sample…

Cranked Lift out and Pouring Tongs for A4 Crucible (Other sizes

Safety - Pivot points should be checked regularly and replaced as necessary.
              Do not…

Cranked Lift out and Pouring Tongs for A5 Crucible (Other sizes

Safety - Pivot points should be checked regularly and replaced as necessary.
              Do not…

Cranked Lift out and Pouring Tongs for A6 Crucible (Other sizes

Safety - Pivot points should be checked regularly and replaced as necessary.
              Do not…

Dust Bag (for Grahite powder application)

Description
The graphite dust bag is made from finely woven material and has built in draw string to keep the graphite powder…

Dust Bag (for parting powder application)

Description49 The product is made from finely woven material and has built in draw string…

Furnace Charging Tongs

Furnace Charging Tongs These are cast iron charging tongs essential for safely lowering ingots into the crucible. They can open and…

Galvanised Steel Bucket

Galvanised Steel Bucket
Suitable for hot Ash Slag and Dross
Excellent quenching bucket
Horizontal Body Swedges For Extra Strength
Hot…

Ingot Mold Pressed Steel

An excellent cheap substitute for the small founder is a small cake tray for making small ingots in all metals…

Ingot Mould (4 bay)

Unlike some ingot moulds these have been designed with a good taper and smooth inside walls to allow easy release…

Ingot Mould Cast  (Single bay)

Unlike some ingot moulds these have been designed with a good taper and smooth inside walls to allow easy release…

Ingot Mould Large Flat

Unlike some ingot moulds these have been designed with a good taper and smooth inside walls to allow easy release…

Lift out Tongs for A12 Crucible (Other sizes available)

**Check Pivot point for wear and security before each use and replace if worn or damaged** These are specifically made to…

Result Pages: